Can Ring Stick up Cam be mounted on Ceiling?

Can Ring stick up cam be mounted on the ceiling? Yes, with the proper tools and know-how. If you are looking for a camera with a lower mounting point, look no further than Ring Stick Up Cam. With the ability to mount on most ceilings from 12 to 15 feet from the floor, the ring stick-up camera can be mounted in any room for an active home.

In addition, the Stick Up Cam has a 140-degree field of view, which is perfect for any room. So, if you are worried if you can mount your ring stick-up camera upside down on the ceiling, don’t be. To mount your ring stick-up cam, you’ll need a ring cam ceiling mount.

For example;

The Ring Stick Up Cam Bracket Mounting Kit is a 360-degree swivel ceiling mount that can be used with the Ring Stick up cam. It allows for flexible positioning and installation of the camera, which is very important when trying to capture all angles of your home or office.

Does The Ring Stick-Up Cam Come With A Mount?

The Ring Stick-Up Camera includes a mount. However, the offered mounting options are inherently limited, and you may want to consider alternative mounting methods to get the most out of your Ring camera.

The mounting system is built into the camera’s base. To utilize the mount, separate the base from the camera body and then attach it to a wall of your choice.

This may be sufficient for practically every smart home setup, but if you want to get the most out of your camera, you will eventually want a more intriguing viewpoint.

Matching the arrows is an important component of using the provided mount. This keeps the camera from falling out of the mounting. This is a fantastic low-tech safety feature that keeps your Ring camera from simply slipping off the wall owing to gravity.

Top 2 Ceiling Mount For Ring Stick up Cam

360 Degree Adjustable Mount for Ring Stick Up

The 360 Degree Adjustable Mount for Ring Stick Up Cam is compatible with the original Stick Up Cam Plug-in, Elite, Battery, and 2nd Gen and 3rd Gen.

It can be easily installed on a wall or ceiling thanks to its screw-fixing base which allows for more stability. The mount will allow you to swivel 360° in either direction as well as tilting it 90°.

This high-quality mount is waterproof and rustproof making it perfect for outdoor use.

Add-On Mount for Stick Up Cam, White

This Kit includes spare parts for setting up easily. Compatible with Ring Stick Up Cam. Mount Stick Up Cam on the ceiling and adjust the angle.

How to install your Stick up Cam with the ceiling mount

It is simple to install your Ring Stick Up Cam Battery Video Doorbell Wired on the ceiling. Scroll down for a step-by-step walkthrough.

Charge the included battery.

To begin, completely charge the included battery by connecting it to a USB power source with the orange wire provided. When only one LED is lighted, the battery is fully charged.

Take off the battery cover.

Unlock the battery cover by twisting it counterclockwise, then remove it from your Stick Up Cam.

Select a location.

Stick Up Cam is content almost anyplace, indoors or out. Choose a location that will offer you the desired view.

Take out the base.

Using a normal Philips-head screwdriver, unscrew it.

Connect the Stick Up Cam Mount.

Attach the Stick Up Cam Mount’s smaller end to the back of the Stick Up Cam. Screw it in place with the large silver screw that came with the Stick Up Cam Mount.

Connect the rubber pad

Ensure that the white rubber pad is securely attached to the Stick Up Cam Mount’s base. Otherwise, secure it by inserting the rubber cushion into the mount’s base.

Check if the mount can be rotated.

Swivel the mount so that the base is above the camera after attaching it to the back of your Stick Up Cam. Place the camera, rubber side down, on the ceiling where you intend to mount your Stick Up Cam.

Insert the camera.

To secure the Stick Up Cam Mount base to the ceiling, use the three mounting screws. If you’re placing your camera on masonry or stucco, use the supplied drill bit to drill holes in the ceiling before inserting the enclosed anchors.

Reinstall the cover.

Return the Stick Up Cam’s back cover to its original position. Tighten the attached screw with the star-shaped end of the provided screwdriver.

Attach the cover to the base with a snap.

If desired, screw in the security screws.