Can Ring Video Doorbell 3 Plus be Hardwired

The Ring Video Doorbell 3 Plus is a newer model that has been on the market for a while now. You can find all the details on our website, but what we want to know is whether or not you can hardwire it.

Ring Video Doorbell 2 was only available as a Wi-Fi-enabled device, but Ring has now released an upgraded version that’s both Wi-Fi and hardwired. We’ve spent the last few days testing the Ring Doorbell 3 Plus and, as well as its Wi-Fi capabilities, we also wanted to see if it had the same performance as the original Ring Video Doorbell 2 when it came to hardwired connections.

So, we decided to install it as hardwired and see if it behaved with the same performance as the original. We also wanted to test the battery life since, as you know, Ring Video Doorbell 3 Plus comes with a non-removable battery.

Can Ring Video Doorbell 3 Plus be Hardwired?

The Ring Video Doorbell 3 Plus is an entry-level smart home device that has been of great interest to those wanting to explore the world of video monitoring. This model can be hardwired and comes with a 2-year warranty. However, some users may find the lack of wireless options limiting.

Ring Video Doorbell 3 Plus has a built-in battery. However, it can also be connected to a power source. In fact, most users find the option of using wires to be much more reliable as compared to the wireless option since power cuts will not prevent them from being able to hear and see who’s at their door.

That said, Ring Video Doorbell 3 Plus must be hardwired through a 16VAC transformer which is not included in the box. Users will also need to purchase a 12VAC transformer kit which includes a battery and an adapter.

How to hardwire the Ring Doorbell 3 Plus?

In this section, we shall run through some step-by-step guides on how you can successfully hardwire the ring doorbell 3 plus.

The Ring Doorbell 3 Plus is one of the most popular and easy-to-install doorbells on the market. With this knowledge, you’ll be able to install and set up your Ring Doorbell 3 Plus in no time at all!

A hardwired ring doorbell is great for those who either don’t have wifi or have spotty wifi. This post will help you wire the doorbell on your wall so you’ll never miss a visitor knocking again.

Step 1:

Go to your electrical box and disconnect the old doorbell. For any DIYers out there, you’ll want to remove the old transformer and take note of the wire colors.

This is where the wires will be connected from your Ring Doorbell 3+.  The Ring Doorbell 3+ needs two wires connected to it: a power wire and a ground wire. We will be connecting these wires to the Common screw terminal (green screw) and the Neutral screw terminal (white screw).

Step 2:

You’ll notice the two wires actually have different colors. It is important that you match the colors exactly. The Ring Doorbell 3+ only needs switched power and ground. If you are not sure if your old doorbell uses either, then just use a crimper to make it safe for the Ring Doorbell 3 plus.

Step 3:

Now screw them into place on your wall. You will need a drill to drive in the screws.

Step 4:

Attach the Ring Doorbell 3+ to the wall using the included mounting hardware. The ring doorbell has two different methods for mounting. There is a screw mount and double-sided tape. I prefer the tape method because it allows you to remove it if you ever need to. Also, if you want extra security, you can use zip ties or additional screws to secure it even more.
There are just 6 screws that need to be tightened. It is important that you tighten them in order.

Step 5:

Power your doorbell to test it out. It should be good to go!
We will all be a lot safer now with our ring doorbells! Don’t miss out – Get a Ring Doorbell 3 Plus today!