Eufy Activity Zone Not Working: How to Get Eufy Activity Zones Working

However, there may be times when you encounter the frustrating issue of Eufy activity zone not working. Fortunately, this issue can be resolved with a few simple steps.

In this post, we’ll guide you through the process of setting up and troubleshooting Eufy activity zone, ensuring that you can make the most of this vital feature.

Why is Eufy Activity Zone Not Working?

The Eufy activity zone may not work due to incorrect camera settings, such as the angle, light exposure, motion detection area, and sensitivity. These settings can cause the camera to miss objects entering the specified zone or detect activity from outside the zone.

The result is either no notifications or false alerts. To fix this, users can adjust the camera angle and sensitivity, customize the activity zone, and use the feature during the day. By doing so, they can ensure that the Eufy activity zone works effectively.

How does Eufy activity zone work?

To further explain how Eufy activity zone works, once you have set up an activity zone on your Eufy camera, the device will only send you notifications and record a clip when motion is detected within the specified area.

This feature helps you focus on monitoring the specific areas that are of the most important to you, and reduce unnecessary alerts and recordings.

When motion is detected within the activity zone, the Eufy camera will immediately start recording a clip of the event, which can be viewed in the Eufy Security app. The device will also send you a notification to your smartphone, alerting you of the motion that was detected.

It’s important to note that the Eufy activity zone feature is dependent on the camera’s motion detection capabilities. If the camera is placed too high or too low, or if it’s facing the wrong direction, it may not be able to detect motion in the activity zone as effectively.

Therefore, it’s important to position the camera correctly and adjust the motion sensitivity settings accordingly to ensure the best results.

In summary, Eufy activity zone is a useful feature that allows you to monitor specific areas of your property and receive notifications only when motion is detected within those areas.

By following the steps outlined above and ensuring proper camera placement and sensitivity adjustments, you can effectively use this feature to enhance your home security.

How to Fix Eufy Activity Zone Not Working

Eufy activity zone may not work properly due to various reasons, such as camera angle, light exposure, motion detection area, and sensitivity settings.

Here are some tips to help you fix the issue:

  1. Adjust the Camera Angle: The camera may not detect objects if it is not angled correctly. Changing the angle of the camera can help it detect objects better.
  2. Use Activity Zone Feature Only at Night: The activity zone feature is best used at night when there is less light. Using the feature at night can help reduce false alerts and ensure that the camera is triggered only when necessary.
  3. Check Motion Detection Sensitivity Settings: Check the motion detection sensitivity settings and customize the activity zone using the EufySecurity app. You can also adjust the sensitivity level and other motion detection settings as needed.
  4. Check App Notification Permissions: Ensure that the app notification permissions are set correctly so that you receive alerts for motion and activity zones.
  5. Check for Possible Objects Blocking the View: Check for possible objects like trees, bushes, fences, awnings, or walls that may be blocking the view of the camera and causing the activity zone feature not to work.
  6. Reset Your Eufy Device: If none of the above solutions work, try resetting your device to its factory default settings or power cycling it to refresh it and remove any temporary glitches.

By following these tips, you can ensure that your Eufy activity zone is working properly. If the issue persists, you can contact Eufy customer support for further assistance.

How to fix Eufy cam 2C activity zone not working at night

These steps help troubleshoot a Eufy cam 2C that is not working properly at night.

Adjusting the angle of the camera, checking sensitivity settings, and adjusting the activity zones are all important steps in ensuring that the camera is detecting activity correctly.

Power cycling the camera can also help reset any minor programming bugs that may be causing the issue.

Following these steps can help you fix the activity zone not working at night on your Eufy cam 2C.

What are the benefits of using Eufy Activity Zone?

The benefits of using Eufy Activity Zone include providing an additional layer of security by alerting you when someone enters a specified area, recording activity within that area for easy monitoring and review, customizing the motion detection zone to prevent false alerts, and helping the camera detect motion more easily in focused areas.

Additionally, using the Activity Zone feature ensures that the camera won’t pick up motion outside of the specified zone, giving you greater peace of mind and security.

Why is my activity zones not working on eufycam 2 pro?

It’s possible that improper adjustment of the camera angle and light exposure, as well as incorrect detection type settings and sensitivity settings, can prevent activity zones from working properly on the Eufycam 2 Pro.

To troubleshoot this issue, you can adjust the camera angle and ensure adequate light exposure, check the detection type settings, and adjust the detection sensitivity as needed. If these steps don’t resolve the issue, you may need to contact Eufy support for further assistance.