You’ve been struggling to find the right way to run your security camera wires through the attic. There are many ways you can do it, but none of them seems like they’ll work for you. It can be frustrating trying to figure out what size wire is needed and where it should go.
So we’re here with a solution that will make it so easy and painless for everybody else who is also running their security camera wire through their attic as well without any problems from doing this themselves. This article provides all the instructions on how you can easily get started with this process.
Advantages of installing security camera wires in the attic
- Security cameras can be installed in the attic to monitor areas outside of the house.
- Wiring security camera wires through the attic can conceal them from view and protect them from theft.
- Having a security camera system can also lower your insurance rates if burglars are aware of the surveillance.
- Security camera wires can be installed in the attic for added security.
- The installation process is relatively easy and does not require a lot of special tools or knowledge.
- If you have an existing electrical box, the wires can simply be plugged into it.
- Security camera wires are a cost-effective option that can provide increased security for your home or business.
Tools needed to run security camera wires through Attic
- Electric Drill
- Screws and Bits
- Fish rod
- Helmet with Flashlight
- Electric Plastic Tape
- Camera wires, and Power cabling
- A pencil/marking tool is needed to mark the different places to drill.
- A drilling machine is needed to drill holes or wires to go in.
- A tape measure is needed to measure distances and wires.
A fibreglass pole or chain can be used as a fishing wire through the attic and out of walls without crimping if you don’t have a crimper. A person needs to have a ladder available in case there are problems getting the wires through the attic
Also Read:
- How to Mount Security Camera without Screws and Drilling
- Can You Install Nest Hello Without Chime?
- Can You Wire Ring Doorbell 3 to Existing Doorbell?
- Can You Have Two Nest Doorbells On One Chime?
- Why do you need an SD Card for a Security Camera?
- 5 Best Security Camera System For Church Security
How to Run Security Camera Wires Through the Attic
1. Find out where the cameras and DVR will be installed.
To install the cameras and DVR, you will need to find a location where they can be situated. The camera system must be installed in an area that is accessible and out of the way, but where it can still be monitored. To keep the footage clear and uninterrupted, the camera system should be placed in an attic or other difficult-to-access location.
2. Mark the Locations for the installation and Prepare the Wire
There are a few things you will need to do before installing your security system in an attic. First, you will need to mark where the wire will go and then measure it to be sure it is the correct length. You may also want to use cable concealers to cover wires as they enter and exit walls.
3. Drill the appropriate holes at the marked locations
To install your new security camera, you will need to drill the appropriate holes at the marked locations. Make sure the holes are big enough for wires and the chain to get through. Drop the chain attached to wire down from a hole in the attic and pull the chain along with wire from the socket-sized hole in the room.
4. Attach your wire to a pole or a chain
There are a few things you will need in order to attach your security camera wires to a pole or chain: a wire clipper, an appropriate connector, and a wrench. First, use the wire clipper to cut the wire to the desired length. Next, secure the wire clipper to the connector with the wrench. Finally, attach the connector to the pole or chain.
When attaching your wire to a pole or chain, it is important to make sure that both ends are securely fastened. This will help prevent the wire from becoming tangled and reduce the risk of accidents happening. You can use pliers or a vice grip tool to do this.
5. Pass the wires through the marked holes
Pass the wires through the marked holes. When installing a security system, it is important to first figure out where the cameras and DVR will be placed. Once you have determined those locations, use a drill or other sharp object to make appropriate holes at the marked locations. Then, pass the wires through the holes and secure them in place.
6. Setup the Security Cameras and the DVR
After the wires have been installed, you can add connectors to the wires using a crimper. You may also want to use cable concealers to hide the wires running outside the walls.
First and foremost, you will need some tools. A crimper is necessary to connect the wires, and a cable concealer can be helpful to hide the wires running outside of walls. After gathering your tools, follow these steps:
- Cut the cables to the desired length and strip off about ¾ inch of insulation from each end with the crimper.
- Connect each wire to its corresponding connector on the DVR using the crimper.
- Route the cables through any opening in your wall or attic and down into your basement or home office where you will be setting up your security cameras.
- Connect the power supply to your DVR and plug it into an outlet.
- Turn on your DVR and security cameras.
- Follow the on-screen prompts to configure your DVR for recording.
Things to keep in mind when installing security camera wires in the attic
When running security camera wires through the attic, there are a few things to keep in mind. First, be sure to use a headlamp or flashlight if it is dark in order to avoid injuring yourself. Additionally, be careful walking on the attic floor and try to only step on beams. This will help prevent you from damaging the wires.
Drilling a hole in the attic before drilling through the wall will allow you to see if there are any wires or other obstructions in the way. You’ll be able to tell how far down the drill needs to go and avoid any costly mistakes.
When running security camera wires through the attic, it is important to use a measuring tape to find the distance between where you want to drill and the power outlet. This will help you determine where on the attic to drill. Second, diagrams can be helpful in figuring out how much wire you need and where to place outlets. By following these tips, the installation of security camera wires can be a breeze.
